Pimp my breadbin

This time last week my Beloved and I were thinking about the journey home from my parents’ place in Kent and, along with the kit I’d dragged down there to get some work done, we came back with some C64s because I want to “pimp” one a bit and needed a working or repairable board as a starting point. Here’s the one I’ve pretty much settled on with Blok Copy in the back to test it and act as a power LED…

…which was working perfectly when it arrived but someone (well okay, probably me) had already removed the SID so the Nano SwinSID that I was given and had been saving for this project was installed. It was then given a quick clean and the thermal paste removed from the VIC-II before being left on test for a day. Here’s an “after” picture taken just now (I’ve just had a quick game of Co-Axis RX to test the joystick port… honest!) with a keyboard, joystick, SD2IEC and Action Replay 6 connected for more thorough testing.

And yes, that’s a C16 keyboard connected to it, but the underlay is from a C64 keyboard so it works correctly – whilst I modified one like this back in the 1980s for my main work C64, this must have been given to me as is during the 1990s because the shift lock is connected and I wasn’t able to do that!

At some point a degree of bravery is going to be required on my part because, when the appropriate parts and time show up, a soldering iron will be taken to this fully working board. The plan is to add recently-created replacement parts like the SwinSID and a replacement PLA – as well as socketing the relevant parts of the board) to produce a machine to demo these toys at events. The SD devices tend to get as much attention from people as the games being run from them do so having a machine I can just open and point to the shiny new components would be good.

I’m currently in two minds about the case though, because I have a couple spare but there is also a deceased C16 here so the case from that could be used with a few modifications to it and the board. I really like the idea of the black case with a neon blue power light, but part of me thinks the stock breadbin with all of the new toys “under the hood” would be cool as well… so more thought is required it seems.

3 thoughts on “Pimp my breadbin

  1. Well, if you were asking me (and I know you’re not), I would love to see a nice shiny restored original C64 on the outside, with new bits under the hood. But that’s me.

  2. Well, I’m interested in opinions since I’m incredibly indecisive… or at least i think I am? That said, i’m not sure how good a job I could do with restoring a standard case! =-)

  3. Well, if you’re not confident in your own abilities in ‘restoring’ a case, then the other option is as you’ve already suggested… pimp the hell out of one…

Leave a Reply

Your email address will not be published. Required fields are marked *